TP3 — Electromagnetic Lock1200 N retention in locked state 3 conductor insertions (M20 x 1.5) 4 directions sideways with additional direction from above Rear opening on the actuator head enables the removal of contaminants Small switch width of 39 mm, therefore ideal for profile mounting Switching element: 2 positive break contacts, 1 N/O and 1 N/C as door signal contact. The two force guided N/C contacts enable redundant (two-channel), galvanically isolated integration in the safety circuit When the actuator is removed the NC contacts are open and the NO contact is closed Pivoting actuator type A for right and left hung doors Pivoting actuator type B for top and bottom hung doors Please order actuating key separately This plastic encapsulated safety switch for monitoring moveable separating protective devices is kept shut and locked by the safety switch until the risk of injury from potentially dangerous machine parts (e.g. run-on movements) has passed. The protective devic